Olimex LPC-L2294 problem

Development Boards MicroMod
1

Hello all,

I am newbie to the ARM processor. I got an old Olimex LPC-L2294 board from a friend.

Unfortunately the CD accompanied with the board has gone corrupt, it just reboots the PC when tried to read.

Olimex website does not have any user manual for this board on their site.

I have downloaded some sample program and also successfully compiled one program using a GNU compiler.

But I am not being able to connect to this board for downloading the program. I tried Flash Magic via serial port. I do not know how to use the OpenOCD received with the board. Also since I do not have the manual, I am confused about what link settings to keep on the board.

Can somebody share with me - how to get started with this kit?

Thank you to all…

2

gopal_amlekar:
But I am not being able to connect to this board for downloading the program. I tried Flash Magic via serial port. I do not know how to use the OpenOCD received with the board. Also since I do not have the manual, I am confused about what link settings to keep on the board.

Look at the schematic that you can download from the Olimex website. It shows the DIP switch settings for ICSP programming and the Boot0 / Boot1 settings.