Output charging status of Lumidrive on pin?

Components & Accessories LEDs
1

I was hoping to change a pin on Lumidrive to high/low depending on whether the battery is charging or not. There’s an LED status indicator on the board but from what I see on the schematics I don’t see a way to send that to a pin… but I also don’t really know what I’m doing so there’s that.

Anyone have ideas on how I might make this work please?

2

The lumidrive doesn’t know if it’s charging or not. Unfortunately there is no pin to connect too. Your best bet would be to connect a wire to the low side of the charge led and watch for a voltage decrease indicating charging is taking place.