RN42, connection two module problems

Wireless & IoT
1

Hello

I have two module RN42, firmware 6.15. No problem connect to Pc, and Nokia ld3w, but I can’t connected two module together. I tried lots of options, like SA,0, SA,4, DCE, DTE, SPP

Configuration master:

Settings

BTA=000666603771

BTName=FireFly-3771

Baudrt(SW4)=9600

Mode =Mstr

Authen=4

PinCod=0000

Bonded=0

Rem=000666605726

OTHER Settings

Profile= SPP

CfgChar= $

SniffEna=0

LowPower=0

TX Power=0

IOPorts= 0

IOValues=0

Sleeptmr=0

DebugMod=0

RoleSwch=0

Configuration of slave:

Settings

BTA=000666605726

BTName=FireFly-5726

Baudrt(SW4)=9600

Mode =Slav

Authen=4

PinCod=0000

Bonded=0

Rem=NONE SET

OTHER Settings

Profile= SPP

CfgChar= $

SniffEna=0

LowPower=0

TX Power=0

IOPorts= 0

IOValues=0

Sleeptmr=0

DebugMod=0

RoleSwch=0

common configuration:

ADVANCED Settings

SrvName= SPP

SrvClass=0000

DevClass=1F00

InqWindw=0100

PagWindw=0100

CfgTimer=255

StatuStr=%

HidFlags=200

DTRtimer=8

KeySwapr=0

When I try connect C:

TRYING

%NEW_PAIRING

CONNECT failed

sorry for my bad english.

RN Technology Used : Bluetooth

RN FirmWare Used : 6.15 RN Subject : Connecting two module

RN Hardware used : PC

2

How is this project going? I have two RN42XV modules and my laptop. I am investigating this module and I have done a lot of work with XBees. This module at first try is very cryptic! I am trying to break through the the getting started phase. I am able to connect with a USB to XBee adapter to the laptop and configure the RN42XV. I have had problems connecting remotely to my modules with Windows 7. I am using Tera Term to communicate with the device. Sometimes the device will remotely connect however this happens only as a keyboard with th HID drivers…and its driving me crazy.

I you have experienced this and got around it, please give a clue or details! Thank you