Hi everybody!
I have a big task to revive a gadget (tablet this time). To do that I need to:
- **Get a JTAG "dongle"**
- **Get the OpenOCD SW**
- **Make a configuration**
- **Get the appropriate bootloader**
- **Run**
The stages may have following complications:
- **Get a JTAG "dongle"**
Need to confirm that the dongle is suitable for the “brick” SoC. Check RTCK particularly?
- **Get the OpenOCD SW**
Easy
- **Make a configuration**
Based on known config for the dongle (?)
- **Get the appropriate bootloader**
Can get one…
- **Run**
The 1st is most annoying me. E.g. I'll soon have USB ASP+USB Blaster 2 In1 download For ALTERA FPGA CPLD AVR USB-Multi-Blaster . Is it suitable to get Samsung GT-P1000 revived?
The 3rd will be tough probably…
Any comments will be helpful. I’m total newbie in JTAG staff. Please push me to the right direction.
Thank!