Technical Support for Garmin LidarLite_V4 Qwiic attached to Arduino Uno

Sensors Distance
1

Dear Sparkfun Support,

I am writing to inquire into possible wiring issues within my Garmin/Sparkfun product as the pwr led does not light up and I cannot seem to connect to my Arduino I2C interface no matter what configuration I use. I have attached images of my soldered Qwiic Garmin LidarLite as well and the configuration when attached to my arduino.

Sincerely,

Ajay

IMG-1449.jpg
IMG-1449.jpg3024×4032 2.29 MB

IMG-1448.jpg
IMG-1448.jpg3024×4032 2.05 MB

IMG-1447.jpg
IMG-1447.jpg3024×4032 1.88 MB

2

Previously helped via alternate channel - the issue was that 5v jumper needed to be removed/desoldered from the back of the board (find “5v disconnect” section here https://learn.sparkfun.com/tutorials/ga … -guide/all)