WRONG SMD Connector for E700 Camera

GPS/GNSS Development Boards
1

Hello! We would like to develop interface beetween GM862-GPS and E700 so we made our own camera module with E700 Camera and ATMEGA644 .

ATMEGA644 is used to capture image from E700 Camera and then image is sent by RS232 to GM862.

We ordered SMD Connector for E700 Camera on this link:

http://www.sparkfun.com/commerce/produc … cts_id=638

but you can’t plug the camera in this connector!

???

How can you sell wrong connectors for E700 Camera? Either you even don’t know that this connector doesn’t fit to E700 Camera or you’re … no comment!!!

Some kind of explanation would be wonderful!Cause this is quite a setback for us.

2

Perhaps the camera sold by SFE has a different connector from the one in the phone. The cameras don’t look identical to me.

Leon

3

Hi! We have ordered this camera from sparkfun:http://www.sparkfun.com/commerce/produc … cts_id=637

but this one has yellow PCB our has green PCB

and SMD connector for camera:http://www.sparkfun.com/commerce/produc … cts_id=638

which i would think would fit the camera.

Or we had to buy breakout board to connect the camera?

Because we can make our own breakout board so we only need connectors.