Transmitter is an xbee3 on a shield and redboard.
Receiver is an xbee3 on an explorer.
Analog pressure sensor is connected to +5v, gnd, and analog input 0 on shield.
With a voltmeter, baseline sensor output is .18v.
Using XCTU serial console, output is 1.09v from the following commands:
+++OK
ATD02
OK
ATAC
OK
ATIS
01
0600
03FF
03A1
Is 03A1 the output for analog 0?
03A1 is 929 bits or 929*(1.2/1023) = 1.09v?
What is wrong?
Any help would be appreciated.