2GB Jetson nano dev kit - Jetbot

Sensors Imaging
1

Hello, I have purchased from Sparkfun the components needed to build a Jetbot, the qwiic PHat and driver and LMx219 camera. I have 2 SanDisk SD cards, and I tried to flash both sparkfun images given in the assembly guide. Only later I realized the images provided are not capable with the 2GB Jetson nano Kit. I have entered your assembly guide for the 2GB Kit but also there you provide non capable images.

I have successfully flashed the Nvidia image file provided by their site and I have downloaded the Modification files from your assembly and followed the step with switching the jetbot folder but i still do not have any response.

I would like for desperate detailed guidance including a solution for how and where I can download the capable sparkfun image.

Thank you,

2

Which version of JetPack are you DLing from Nvidia? (Some SD cards can only use the older 4.3 and earlier releases of JetPack) - usually the easiest method to fix this is using a premium SD card, which wupports the newer versions of JetPack and its features)

We sell one here: https://www.sparkfun.com/products/16498 , or you can source one locally :slight_smile:

3

Thanks for the answer. I’m using a SanDisk Ultra 64GB with was able to run the jetbot-043_nano-2gb-jp45 image from Nvidia, but in the assembly guide it says I must download one of the two images listsed according to the SD card I have, but it also says it is not capable with the 2GB nano kit.

Where can i find the image to download if I have the 2GB nano kit?