Connect RTK Facet to a Hi Target HDL-460A radio

[amlago]

Sparkfun facet connection and radio CHC Dl8 28 w?

Eureka. After more than a year of research I achieved my goal. My idea was to use the Facet as a base and broadcast its corrections via professional radio, to receive them on a CHC i50 rover. I managed to go from TTL to RS232 with a converter and my problems were with prints in the converter. In the end, by trying a lot, I managed to define which port of the converter the Tx of the facet should be connected to. The power for the converter comes from the Facet and I have not noticed that the battery drains much faster. The second challenge was to splice cables and connectors that matched the CHC radio. In the end everything worked very well. I tell you that the radio and wiring for it were purchased on Aliexpress second-hand but like new. The TTL-RS232 converter was purchased here in my country Uruguay, since its value is very low. So I have a first-class base that can issue corrections via Wi-Fi through ntrip as originally used and now through a professional radio with a range …