Hi, I am trying to set up the DEV 16832. I put the SD card and connected the USB C cable and opened serial monitor in arduino IDE. I am getting symbols as data. I attached picture. I am not able to figure out the issue. [Screenshot (327).png]

DEV 16832 set up and connection

TS-Russell June 13, 2023, 5:28pm 4

Double check the COM port and board selected https://learn.sparkfun.com/tutorials/op … figuration, ensure newline is selected, change the baud rate to 115200

Topic		Replies	Views
Openlog Artemis DEV-16832 - Configuration menu Artemis	6	40	January 16, 2025
Serial.begin(115200); Artemis	6	1772	November 21, 2022
Cannot Program Artemis RedBoard via Arduino Artemis	14	4078	May 19, 2022
No serial port on Artemis Uno found in Mac Catalina Artemis	7	3705	May 14, 2020
Sparkfun Artemis Open log - on board IMU sensors non responsive Artemis	23	4682	December 18, 2023