Hello ,
We have a 03-ROB-12779 EasyDriver and it seems is DOA, when we connect just the power supply (used 12v psu) the board is getting super hot in a matter of seconds.
We did not continue to other connections as this is a serious issue.
Any advice would be great!
Thanks in advance!
Compare your wiring/setup with https://learn.sparkfun.com/tutorials/ea … are-hookup - are they similar?
Share a photo of your board/wiring
TS-Russell:
Compare your wiring/setup with https://learn.sparkfun.com/tutorials/ea … are-hookup - are they similar?Share a photo of your board/wiring
We just connected the 12v psu to check the board and within 2-3 seconds we could not touch it as it was very hot and we did not procceed to any further wiring.
In the attached photo you will see the board, no soldering or any other mistreatment from our side.
Thanks for your time
Going to switch to PM for privacy reasons; we’ll get ya squared away 
