GE865 evaluation board power on

Wireless & IoT
1

Good afternoon.

We have purchased a GE865 Evaluation Board.

It requires the pressure of the power button for 1 or 2 secs to turn it on.

We need to package the board into a closed box, then we need the possibility to turn on the board without the button pressure.

Is it possible, for example, shortcutting some pins?

Thanks in advance.

2

If it’s the same as the GM862 eval board, you should have ON/OFF and GND pads on the board that you can connect to an external momentary switch.

3

It’s correct.

Thanks