Hey!
I have some experience with Arduino/redboard but would still consider myself a newbie. I am in need of some guidance…I need to control several servos and current sensor at a range of 15’ to 40’…I need to know if I need to do anything specific to eliminate any interference or signal loss…I’m automating my dust collection system in my woodshop and each tool will have a current sensor and a servo. When the Arduino/redboard see that a took is on, it will energize the servo and trigger a 240vac relay to turn the collector on, then and the reverse the process when the tool is off. I hope I made it clear, if not, please ask any clarification questions…
Chris