Has anyone been successful marrying the Wiznet NM7010B+/W3150A+ board to a LPC2119/LPC2129 through the SPI port. I’ve been banging my head on this thing for way too long. I setup all the ports the way the Wiznet document says (and read the regsisters back out to verify) and I can’t get this thing to ping me back to save my life. 
We have designed a controller receiving from one PC via Wiznet module NM7010B+. We are using one Microchip PIC 18F4550 for receiving the datas from Wiznet. But the speed is very low : only 7 - 8 Kbits / s.
We have tried with an other Microchip PIC 18F2550. Same problem.
We need to reach the speed of 450Kbits/s.
Is it possible ?
Thanks for your help,
Marc :oops: