I am reaching out for further assistance with a project I am working on using the Micro:climate Kit.
I am trying to create a code to log the following data to an SD card:
As I’m not familiar with makecode, I would greatly appreciate any help in developing this code, or if possible, assistance from someone who could build it.
Eh, you won’t probably won’t find someone who’ll build it for you…the general idea is you’d watch/learn from online resources and begin DIY…here’s a good starting point micro:climate Kit Experiment Guide - SparkFun Learn
We do have a guide specifically for logging to SD card (it’s the 7th of 7), see micro:climate Kit Experiment Guide - SparkFun Learn
Thank you so much for your response.
We fully respect and appreciate the educational mission of your products. Our goal, however, is to install a weather station for experimental purposes as part of a European program our company is participating in. To provide some context, we are a manufacturer of wheat drinking straws, using agricultural byproducts as our prime material. As part of our educational efforts, we thought testing the Micro:climate Kit would be beneficial for our activities.
We have gone through the resources you provided, as well as many additional tutorials on YouTube, but unfortunately, we have not been able to get it to work properly. Due to the limited resources available to us, learning to code falls outside the scope of our team’s expertise. This is why we are reaching out for support in building the weather station we need for our project.