Pocket AVR Programmer & AVR Studio

hello everyone

I bought a few days ago, a “Pocket AVR Programmer” but I can not get it working or “winavr” or “AVR Studio”.

When you connect via USB, while light of “POWER” I do not detect any windows device type. which I can not get the drivers.

http://www.sparkfun.com/commerce/produc … ts_id=9231

This is true? or could be damaged?

thanks

I also can’t seem to get the pocket programmer to be recognized by windows.

when i plug it in i get a “device not recognized” so i manually point to the drivers using the device manager. The result is “No drivers were found at this location”.

Device Instance ID is being listed as

USB\VID_0000&PID_0000\5&212AB1B5&0&1

The cheap USB hub hack described in another thread [<LINK_TEXT text=“viewtopic.php?t=16048”>http://forum.sparkfun.com/viewtopic.php?t=16048</LINK_TEXT> worked for me.

I haven’t tried AVR Studio as I just started, but the pocket AVR programmer working using avrdude under Vista 32 bit. I’m connecting my programmer using a non-powered Radio Shack USB hub. I’m not sure if I’m allowed to post model numbers of non-sparkfun parts but you can PM me if you want the specific hub I used.](http://forum.sparkfun.com/viewtopic.php?t=16048)

I just pluged it in, upon being pormted from usb “new device detected” entered path to the driver, that I had unzipped after downloading from Sparkfun, and it worked. :slight_smile: