Port select with the USB Eval board

GPS/GNSS Development Boards
1

I just got my Lassen iQ USB Eval Board and all is working well with iQ Monitor. iQ Chat only wants to talk on comm ports 1 and 2 and I haven’t figured out how to get the USB driver to switch comm ports, but that is another problem I’m willing to tackle on my own.

However, I do have one question though…I see some pins labeled “Port Select” and I’m assuming that these would let me select port 2 on the Lassen iQ board so that I could see the NMEA data…does anyone know how to do this? The instructions PDF file is for the RS-232 board only and does not describe the USB board at all. Thanks in advance for the help :slight_smile:

charlie

2

Hi Charlie,

I would like to likewise buy the Lassen iQ USB Eval Board.

I have the same questions, when is the instructions PDF file is for the USB board available?

Which the questions answers how to select port 2 on the Lassen iQ board so that I could see the NMEA data.

You could solve the problem ?

Willy