Telit Run At remotely

hi I have been trying to get a remote connection working with Telit module GC864 quad V2

using hyper-terminal, telnet etc. but I have been unable to get it to work.

I get a connection, but when I supply the authentication userName & password nothing happends. I also tried putting the Telit module in step-by-step mode but never prompts me to enter userName nor password.

Can someone please help me out here, with a possible solution for my issue.

The manual can be found http://www.telit.com/en/products/gsm-gp … c=show&p=7 and its called Telit_Run_AT_Remotely_Application_Note_r1

PS: the GPRS module is in Server Mode

I appreciate your help

This isn’t tremendously helpful but you may find it useful, it is certainly easier than using hyperterm:

http://thebyteworks.com/download/rsterm.zip

Hi Thanks for your reply,

But I found out that the solution was the authentication strings being sent to the module need to be terminated with once this is done it work. I have however not been able to use hyperterminal. I do have rsterm. thanks.