Copper Pour errors on BatchPCB

Archive BatchPCB
1

Sorry for all of the questions, guys. I am totally new to this, and want to make sure everything is good.

I made a design. I ran it through the BatchPCB bot, and everything is good. (To the extent that it checks) :wink:

I then added a copper pour and it came back with several errors. The odd thing is that the image that the bot sent back does not show traces too close or anything…It just shows large diagonal lines through the Copper pour.

Are there limitations that I don’t know of, or am I breaking a rule that I am not aware of?

Here is a sample pic: (note the yellow X’s)

http://i16.photobucket.com/albums/b45/l … 1165535533

I appreciate all of the help.

Shaun

2

In your design rules …make (Shapes tab) all the pads round…octagonal pads give these errors.

James L

3

Thanks, James.

4

Shaun,

You know…I didn’t even ask…if you were using Eagle…if you are not…I’m not sure how to change your pad shapes…

But I know this to be the root of the problem…I’ve already emailed Batch PCB…and they know of the problem …and are working on a fix.

James L