Eagle File for Thumb Joytick - COM-09032

Other Miscellaneous
1

On the documents tab for the Thumb Joystick https://www.sparkfun.com/products/9032 there is a link to Eagle files for this product. That takes me to the GitHub page for the Electromechanical library. That library does not seem to have the needed data for the Thumb Joystick. Is there another place where the Thumb Joystick eagle files live?

2

There aren’t any for the joystick itself (though there are 3d models available on that product page); we’ll get that link to nowhere deleted.

We do have eagle files available for the joystick shield kit https://github.com/sparkfun/Joystick_Sh … r/Hardware and breakout https://github.com/sparkfun/Thumb_Joyst … 2/Hardware

3

Thanks,

I’ve imported (Fusion 360) both the 3d PCB for breakout and the 3d model for Thumb Joystick, and the joystick pins do not align with the breakout at all. See image below. I’ve tried both the STEP and Solidworks models for the joystick.

joystick.jpg
joystick.jpg1092×754 94.5 KB

Thanks,

Scott…

4

TS-Russell:
There aren’t any for the joystick itself (though there are 3d models available on that product page); we’ll get that link to nowhere deleted.

We do have eagle files available for the joystick shield kit https://github.com/sparkfun/Joystick_Sh … r/Hardware and breakout https://github.com/sparkfun/Thumb_Joyst … 2/Hardware

Any thoughts on the above alignment issue?

Scott…

5

One or both 3D models are wrong.

I have use both of those parts together and they do fit together perfectly.